MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

1. The motion of the cam is transferred to the valves through
2. The condition that causes vapour locking in a brake system is
3. The function of an alternator in an automobile is to
4. It is necessary to maintain the valve clearances as they
5. In a unit type body (frameless body) design, the sheet metal parts are welded together, forming a frame work to which outer skin is attached.
6. The most commonly used supplementary restraint system (SRS) component is
7. The valve overlap in four stroke petrol engines is approximately
8. The petrol engines are also known as
9. The natural gas is compressed in a CNG cylinder at a pressure of
10. In a fuel injection system, the electronic control module (ECM) calculates the optimum fuel-injection volume for the engine condition based on the data received from the sensors, and injects this volume of fuel into the intake manifold at the optimum timing.
11. The operation of removing trapped air from the hydraulic braking system is known as
12. The compression ratio in petrol engine is kept less than in Diesel engine because
13. The cetane number of a Diesel fuel is a measure of
14. The component that connects the steering rack to the knuckles is
15. The painting of automobiles is done to
16. The calorific value of petrol is about
17. The function of a first compression ring (top ring) is that it
18. The braking control type traction control system (TCS) generally operates in the speed range of
19. The stroke of an engine is the
20. The function of a second ring is that it is a
Automobile Quiz 2
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}

MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

Leave a Reply

Your email address will not be published. Required fields are marked *