<< MCQ 8 MCQ 9 MCQ 10 MCQ 11

Automobile MCQ 11

1. In Diesel engines, the duration between the time of injection and the time of ignition is called
2. In a single dry plate clutch, torsional vibrations are absorbed by
3. In an engine, the temperature of the piston will be more at the
4. An over-inflated tyre will wear the tread most near the
5. Cushioning springs in clutch plate reduces
6. In a four stroke engine for each crankshaft revolution, the camshaft revolves
7. If a tyre is designated as 175/65 R14 82 S, then the aspect ratio for the tyre is
8. The valve tappet clearance is measured by
9. The specific gravity of petrol is about
10. The clutch is located between the transmission and the
11. In Diesel engines, during suction stroke, __________ is drawn in the cylinder.
12. The function of a governor in automobiles is to
13. The advantage of the fuel injection system over the carburetor system is
14. The component of the oil filter that prevents the passage of metal particles and sludge is
15. The engine oil viscosity is defined by __________ ratings.
16. The function of a connecting rod is
17. In a Diesel engine, the fuel is ignited by
18. The engine oil level should be checked
19. In a four cylinder in-line engine, the number of firing strokes in one revolution of the crank is
20. In a forced feed lubrication system, the device used to guard against excessive oil pressure, is known as
Automobile MCQ 11
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}

<< MCQ 8 MCQ 9 MCQ 10 MCQ 11

Leave a Reply

Your email address will not be published. Required fields are marked *