MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

Automobile Quiz 1

1. Which of the following symptom is caused as a result of brake disc run out ?
2. The portion of a crankshaft which rests on cylinder block is called main journal.
3. A clutch is usually designed to transmit maximum torque which is
4. Incorrect steering axis inclination (S.A.I.) causes
5. In radial tyres
6. The oil pump is driven by the
7. Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle.
8. If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about
9. The information provided by the oxygen (O2) sensor to the feedback control system is about the
10. The aluminium alloy is used in cylinder blocks because
11. The firing order for an in-line four cylinder I.C. engine is
12. The difference between DOT 3 and DOT 4 brake fluids is
13. The tilting of the front wheels away from the vertical, when viewed from the front of the car, is called
14. The cetane rating of Diesel fuel is in the order of
15. Which of the following indicates a multigrade oil ?
16. In a ventilated disc brake,
17. The vehicle ride will be comfortable if
18. The main function of intake manifold is that it
19. The effect of having excess camber is
20. If the air-fuel mixture ignites before the spark takes place at spark plug, the condition is called
Automobile Quiz 1
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}

MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

Leave a Reply

Your email address will not be published. Required fields are marked *